Description
The MS50 is used for top of tank mounting. The MS50 has a 316SS float, 316SS rigid float and two switches for high and low detection. Typical applications where the MS50 is used are butane, propane, oil, chlorine, acids, water and interfaces. The K-TEK MS50 consists of latching reed switches totally enclosed in a stainless steel chamber (other materials available) and a float containing a magnet in which the switches will detect. The sensing element (chamber) and the float are normally inserted into the tank through a top process connection and can be mounted to the tank via flange, if desired. However, the unit can usually be mounted via a single 2″ MNPT process connection. In addition, the float can generally be installed thought the same 2″ process connection. A stilling well may be required if the process liquid is in a turbulent state. The MS50 will provide for the detection of start/stop trip points of either total or interface level in virtually any vessel. These trip points can be used for alarms or to activate a pump motor starter relay. Up to six SPDT switches per unit (NO & NC Contacts)
Interface & total level capability
Trip point adjustable without removing vessel from service
Vibration resistant (Multi-Float option only)
Suitable for high temperature applications
316L stainless steel wetted parts standard
Field adjustable and replaceable switches
316/316L standard, exotic alloys & thermoplastic available
Terminal block(s) included
Datasheet
